POS has no Power

Point of sales Terminal has no power/not On

Cause: Sometimes location may experience power outage, or someone may accidentally unplug the power by mistake.

Troubleshooting and solution: 1) Please check if power adapter and power outlet have power and connectors are securely plugged in. Make sure Power button is pressed. Power button is located at bottom right hand corner underneath the screen.

Or

2) Unplug the power cord behind the POS terminal (Green Plug) and plug it back in firmly. Power on system by pressing the power button.

    • Related Articles

    • Credit card terminal (Clover) not working

      Cause: Clover may be disconnected with POS terminal. Troubleshoot and solution: 1)  Reconnect Clover with POS terminal. (Follow steps on Clover connection instruction guide) 2) Check if Clover Terminal has power connected. All connections to Clover ...

    • POS stuck on boot up screen when rebooted

      Cause: Sometimes windows would need to perform updates on the system. Troubleshoot and solution: 1) Let it update the system which usually will take 15 to 20 minutes. If desktop screen does not load up after 20-25 minutes, please contact SBM Support ...

    • Receipt printer is not printing

      Cause: Printers may lose connection with the POS terminal or ran out of paper/paper jammed. Troubleshoot and solution: 1) Unplug power connector on printer and reconnect it. Make sure all cables connected to printer are connected firmly. Make sure ...

    • Label printer is not printing

      Cause: Printers may lose connection with the POS terminal or ran out of label/label jammed Troubleshoot and solution: 1) Unplug power connector on printer and reconnect it. Make sure all cables connected to printer are connected firmly. Make sure the ...